--Accurately reflects the actual temperature of the measured location
4. Wireless communication between sensor and display--Complete isolation of high and low voltages, no insulation hazards
5. A single display can receive multiple (up to 256) sensor data--Two system modes , distributed and centralized, are available for you to choose from, suitable for different temperature measurement needs.
6. Supports various data protocols such as Modbus and IEC61850--Data can be uploaded to the comprehensive management system to facilitate intelligent management
7. Convenient and rapid implementation
--The product is easy to install, easy to implement, simple to operate, and quick to put into operation
1. Blast furnace station 10KV power distribution room temperature measurement project. This case is a 10KV power distribution room project in a steel plant in Fujian. This project uses the passive wireless temperature sensor developed by our company. The wireless temperature sensor is installed on the 10kv closed high-voltage switch cabinet circuit breaker. On the copper bar at the contact connection.Electromagnetic induction takes electricity.
2. 10KV substation of a chemical fertilizer plant in Henan. This case is a 10KV substation project of a chemical plant in Henan. This project uses the passive wireless temperature sensor developed by our company. The ultra-small wireless temperature sensor is installed on the 10kv switch cabinet circuit breaker. The plum blossom contacts are installed with snaps and auxiliary elastic silicone, which does not affect the contact tension.Power taking method: electromagnetic induction.
3. The second cold-rolled 10KV substation. This case is a second cold-rolled 10kv substation project. This project uses the passive wireless temperature sensor developed by our company. The wireless temperature sensor is installed on the conductive rod of the high-voltage switch cabinet circuit breaker. Thin design, can be built into the insulating sleeve.Power taking method: electromagnetic induction.
4.35KV Cable Temperature Measurement Project This case is a 35KV cable temperature measurement project. The wireless temperature sensor is installed on an outdoor 10kv long-distance high-voltage cable. It takes power through electromagnetic induction, adapts to harsh outdoor environments, and has a long transmission distance of up to 1.8 kilometers.
|
|